The Beta 27 side-address condenser microphone is precision engineered for professional sound reinforcement and project studio recording applications. Its flat frequency response and low self-noise provide unerring performance in demanding environments. A tight supercardioid pattern ensures high gain-before-feedback and maximum isolation from other sound sources.
Supercardioid polar pattern specifically targets the sound source consistently with greatly minimized bleed from off-axis sound sources
Tailored for superior transient response from a low-mass, 1” externally-biased, ultra-thin 24 Karat gold-layered Mylar diaphragm
Flat, neutral frequency response for natural reproduction on stage or in the studio
3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect for consistent, extended low end
-15dB switchable attenuator handles extremely high SPLs with ease
Premium electronic components and gold-plated internal and external connectors
Internal pop filter with three separate mesh layers reduces wind and breath noise
Polar/Pickup Pattern - Supercardiod
Microphone Type - Condenser
Spec Sheet available - Yes
Impedance:
160 ohms
Maximum Frequency Response (Bandwidth):
20 kHz
Maximum Frequency Response (Bandwidth):
20000 Hz
Minimum Frequency Response (Bandwidth):
20 Hz
Minimum Frequency Response (Bandwidth):
0.02 kHz
Impedance:
160 ohm
Sensitivity:
-37 dBV
Signal to Noise Ratio:
85.50 dB
Product Weight:
0.94 lbs
Polarity:
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Low Frequency Response:
flat, -6dB/octave below 115Hz, -18dB/octave below 80Hz
Connector:
Three-pin professional audio (XLR), male
Power Requirements:
48Vdc phantom, 5.6mA
Regulatory Compliance:
CE, EMC
BETA 181
- Side-Address Condenser Microphone with Interchangeable Capsules
BETA 56A
- Supercardioid Dynamic Instrument Microphone, 50 to 16,000Hz Frequency Response