The Quad-cool was developed specifically for ventilating racks in cabinets and closets. Designed to bring fresh air in at the bottom of the cabinet. it consists of 4 very quiet 120mm fans controlled by a two-stage thermal control module, all mounted to a steel plate . The plate installs over a cutout in the floor of the cabinet, a metal or wood intake grille is installed in the toe kick. The plate extends only 1/16” above the cabinet floor, racks can slide in and out without interference. The fan cluster fits within the base plate opening of many popular racks. The thermal control, connected to a remote probe, turns the fans on in low speed at 90° F and switches to full speed at 100° F. Both the low speed cut-in temperature and the speed of the fans in that mode are adjustable. Full speed is activated should the temperature at the remote sensor rise 10 degrees above the low speed cut-in temperature.
Developed to pull fresh room air under the floor of a cabinet credenza, or small closet
Cluster of 4 fans is arranged so that it fits inside the base panel opening of many racks
Base plate holding the fans and thermal control board was designed to be as low-profile as possible
Intake device only
Provisions must be made to allow heated air to leave the enclosure
Fan & Cooler Types - Enclosed Rack (in Cabinet or Closet)
Boxed Weight:
3 lbs
Noise Level:
23 dBA
Number of Fans:
4
Active Power:
8 Watt
Depth:
16.75 in
Height:
0.06 in
Width:
11.50 in
Operating Temperature (Maximum):
100 F
Operating Temperature (Minimum):
90 F
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Video Visions, Inc.
close
Video Visions, Inc. 3600 Boundbrook Avenue Trevose, PA 19053 USA 215-942-6642 www.video-visions.com