RC5-1BC™ for Crestron 1Beyond and Lumens

Model: RC5-1BC

Extends power (no factory camera PSU required), PTZ control, IR and video over CAT5e/CAT6 cable between 10m-100m.
Supports cameras with HDMI video and RS232 serial control.
Simple Plug and Play installation, no programming required.
Allows pass-through of manufacturer firmware updates from codec to camera.
All hardware-specific camera and codec connection cables included.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The RC5-1BC™ camera extension kit has been designed to deliver a transparent, reliable, and cost-effective link between a generic codec/Head-End device and Crestron 1Beyond IV-CAMPTZ-12, IV-CAMPTZ-20 and Lumens CL511 cameras.

Sound Control Technologies (SCT) Camera Extension Kits are designed to streamline the installation of digital video PTZ camera systems. By simplifying complex cabling and extending traditional distance limitations up to 100m, SCT’s extension kits provide integrators with cost and time saving solutions.

Extends power (no factory camera PSU required), PTZ control, IR and video over CAT5e/CAT6 cable between 10m-100m.
Supports cameras with HDMI video and RS232 serial control.
Simple Plug and Play installation, no programming required.
Allows pass-through of manufacturer firmware updates from codec to camera.
All hardware-specific camera and codec connection cables included.
PowerSniffer included for testing SCTLink™ cable conductor continuity.
Integrator only required to provide CAT5e/CAT6 SCTLink™ Cable.
Base Kit: Inclusive of RC5 Modules, Kit Cables and Power Supply
RC5-CE Camera Module
RCC-C001-0.3M HDMI to HDMI Camera Cable
RCC-C002-0.3M RJ45 to RJ45 Cable
PPC-003-0.3M DC Power Plug Cable
RC5-HE Head-End/Codec Module
RCC-H001-1.0M HDMI Head-End Cable
RCC-H016-1.0M RJ45 to RJ45 Cable
WPS-12 Power Supply

ROHS Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes

Certifications: UL, CE, FCC, CCC, TÜV, RCM+GEMS, LPS, BIS, PSE, CB, DoE VI, CoC V5 and RoHS2
Color: Black
Warranty (Length/Type): 3 Years
WPS-12™ Power Supply (Included): Dimension: H: 1.19 x W: 1.85 x D: 4.65 inch; Weight: 0.5 lbs/236g; Input: 100 to 240VAC, 47-63Hz, 1.45A Max; Output: 30VDC, 2A Max; Output Connector: 5.5mm x 2.5mm DC Barrel
Video Format: HDMI, up to 1920x1080p at 60Hz with HDCP support
Ethernet Connectivity (RC5-CE™): Single 10/100 Port
Ethernet Connectivity (RC5-HE™): 10/100 Two Port, Layer 2 Ethernet Switch
SCTLINK™ CABLE SPECS: SCT recommends CAT6 or better cable for the SCTLink™. The use of a shielded cable, while not required for most platforms, is highly recommended. Proper termination and testing, along with good cable management, minimizes potential problems
Wiring Termination Standard: T568A or T568B, 10m Minimum - 100m Maximum Length
Power Consumption: A linked kit will consume 7.5W, plus the power consumption of the attached camera
RC5-CE™ Camera End Module: Dimension: H: 0.93 x W: 2.5 x D: 3.741 inch, Weight: 0.3 lbs/136g
RC5-HE™ Head End Module: Dimension: H: 1.504 x W: 3.813 x D: 3.617 inch, Weight: 0.5 lbs/226g
Cameras: Atlona, AVer, Barco, Cisco, ClearOne, Huddlecam, Lifesize, Lumens, Marshall, Minrray, Panasonic, PTZ Optics, QSC, Sony, VDO360 and VHD
Codecs: Cisco, ClearOne, and other generic codecs

Kit 504591 kb - Data Sheet

Project List