Pro AV Catalog
AJA Video - HA5-12G-T-ST
Request Quote
All Products
aja-video

HDMI 2.0 to 4K 60p to 12G-SDI Converter

Model: HA5-12G-T-ST

  • Includes a single channel Fiber 12G ST transmitter, which extends 12G-SDI signals over long distances (10 km Single Mode).
  • HA5-12G-T-ST ships with FiberST-1T-12G SFP installed.
  • Support for up to 60p input at 4:4:4/4:2:2/4:2:0.
  • HDMI EDID Emulation.
  • Two Sample Interleave (2SI) 4K/UHD source mapping.
Compare
Project List
Product Info
Tech Specs
Documents

Fiber SFP-equipped model is single channel transmitters capable of extending HDMI 4K/UltraHD signals over long distances, up to 10km over a single LC or ST Fiber link respectively. These models ship with SFPs installed and include all functionality of the HA5-12G, with the added benefit of extending audio and video signals further. HDR or High Dynamic Range, provides the ability to display a wider and richer range of colors, much brighter whites and much deeper, darker blacks than standard signals allow. This gives imagery a more 'dynamic' look and allows for natural true to life colors to be communicated to your audience. HA5-12G provides support for analyzing HDR infoframe data coming in over HDMI when used with AJA Mini-Config software. Explore more of our HDR Solution here. Typical 4K signals use a resolution of 4096 x 2160 pixels while UltraHD signals measure 3840 x 2160. This difference can prevent some monitors from being used either in full 4K workflows or in UltraHD workflows. HA5-12G can compensate for these resolution differences, allowing UltraHD monitors to be used in 4K productions and vice versa. HA5-12G also supports High Frame Rate (HFR) inputs. 4K/UltraHD signals at 50 or 60 fps can be fed into HA5-12G and output at up to 60p for viewing with appropriate HDMI 2.0 capable displays. The equalized input on HA5-12G is engineered to support HDMI runs up to 30 meters in length using 24 gauge cable. Embedded HDMI audio support allows for a single cable solution to avoid unnecessary clutter and simplify installation. The 12G-SDI outputs on HA5-12G allows extremely high quality signal representation for use with large raster and deep color workflows where image quality is critical. A 12G-SDI output with PLL clock filtering ensures a low jitter output for solid image stability. An LED indicator shows the input source as either SD (green), HD (red) or 4K/UltraHD (orange) for fast and easy signal identification. Using the two RCA analog audio inputs, embed any 2-channel analog audio signal into the SDI output to maintain proper audio sync throughout the workflow. HA5-12G accepts progressive standard definition signals at 525p and 625p for compatibility with DSLR cameras, allowing the signal from those cameras to be easily incorporated into SDI workflows.

  • Includes a single channel Fiber 12G ST transmitter, which extends 12G-SDI signals over long distances (10 km Single Mode).
  • HA5-12G-T-ST ships with FiberST-1T-12G SFP installed.
  • Support for up to 60p input at 4:4:4/4:2:2/4:2:0.
  • HDMI EDID Emulation.
  • Two Sample Interleave (2SI) 4K/UHD source mapping.
  • Analyzes HDR Infoframe data coming in over HDMI in accordance with HDMI v2.0b/CTA-861-G.
  • HDR Infoframe decoder as defined in CTA-861-G and HDMI v2.0b.
  • Embedded audio can be selected from the HDMI or Analog audio inputs.
  • The Lock LED adjacent to the HDMI input connector indicates by color the detected signal type. Off is no signal, Green is SD-SDI, Red is HD-SDI, Amber is 3G-SDI, Purple is 6G-SDI, and Blue is 12G-SDI.
  • Uses 5-16 VDC power (DWP-U-R1 universal power supply included).
  • USB port used with Mini-Config software application to configure the device via PC/Mac.
  • Covered by five year warranty and AJA’s advanced replacement policy.
 
Request Quote